ZEB Staples ( a division of ZEB
Manufacturing, Inc. )
487
Hillside Ave., 2nd Fl.
Hillside,
NJ 07205
Phone: (908) 687-7200
Fax: (908) 687-7201
Revision date: 11/21/08
1. Product and Company Identification
2. Composition and Ingredients
6. Reactivity
10. Miscellaneous
HMIS Rating:
|
Health |
0 |
|
Flammability |
0 |
|
Reactivity |
0 |
|
Protection |
A |
1. Product
and Company Identification Contents
1.1 Applicable Products/Product Names: All staples produced by ZEB Staples
1.2 Contact Information: Contact Us
(For information or emergencies) ZEB Staples
487 Hillside Ave., H, NJ 07205
Tel: 908-687-7200
Fax: 908-687-7201
Web: zebstaples.com
2. Composition
and Ingredients Contents
The products as supplied are one of the following primary metal compositions:
2.1 Carbon Steel
2.2 Stainless Steel
2.3
Bronze
2.4
Copper, CAS
# 7440-50-8
2.5
Monel ®
2.6
Inconel ®
2.7
Aluminum,
CAS # 7429-90-5
Copper and Aluminum are the only two that have CAS numbers since they are pure materials. Except for these two, all of these items are solid alloys of multiple metals and none are hazardous. . Brand names and trademarks are the property of their respective owners. There are no ingredients subject to the reporting requirements of SARA Title III, Section 313 or 40 CFR 372.
3. Physical
Data Contents
Boiling Point: Extremely High
Vapor Pressure (mm Hg.): Insignificant
Vapor Density (AIR=1): Insignificant
Solubility in Water: Not Soluble
Specific Gravity (H2O=1): 2 to 8 depending upon specific metal used
Melting Point: Very High
Evaporation Rate (Butyl Acetate=1): Will not evaporate
Appearance and Odor: metal of various colors and sizes; odorless
4. Fire
and Explosion Data Contents
Flash Point: None
Flammability Limits (% in air): Not flammable
Recommended Extinguishing Media: Water, Dry Chemical
Special Fire Fighting Procedures: Wear self-contained breathing apparatus
Unusual Fire and Explosion Hazards: None Known
5. Health
Hazards Contents
Threshold Limit value: None
Effects of Overexposure: None
Emergency First Aid Procedures:
Eye Contact: Flush with water at least 15 minutes, get medical attention
Skin Contact: If punctured, get medical attention
Inhalation: None
Ingestion: None
6. Reactivity Contents
Stability: Stable
Conditions to avoid: Extreme Heat
Incompatibility with other materials: Strong Acids (Carbon, Stainless Steel, Inconel, Monel)
Strong Bases (Aluminum, Copper, Bronze)
Hazardous Decomposition: Not Applicable
Hazardous Polymerization: Not Applicable
7. Spill
or Leak Procedures Contents
Procedure if product is spilled:
Sweep up from floor into trash receptacle. Potential skin puncture hazard.
Waste Disposal Procedures:
No special procedures are necessary. Unused, unwanted or damaged staples should be disposed of by methods in accordance with local, state, and federal regulations.
8. Special
Protection Contents
Respiratory Protection: None Required
Local Exhaust: Acceptable Air Exchange
Protective Gloves: None Required
Eye Protection: Safety Glasses
Other Protective Equipment: First Aid for skin punctures
9. Special Precautions Contents
Precautions to be taken in handling and storage, primarily for preservation of the product:
Store in dry place, no special handling procedure is required.
10. Miscellaneous Contents
To the best of our knowledge, the information
contained herein is accurate. However, neither the above named supplier nor any
of its subsidiaries assumes any liability whatsoever for the accuracy or
completeness of the information contained herein.
Final determination of suitability of any
material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution.
Although certain hazards are described herein,
we cannot guarantee that these are the only hazards that exist.
Home – About US – Contact Us – FAQ – News/Events – Directions – Employment – Products – Order